This is the multi-page printable view of this section. Click here to print.

Return to the regular view of this page.

Networking

Learn how to configure networking for your cluster.

1 - Adding entries to Pod /etc/hosts with HostAliases

Adding entries to a Pod's /etc/hosts file provides Pod-level override of hostname resolution when DNS and other options are not applicable. You can add these custom entries with the HostAliases field in PodSpec.

Modification not using HostAliases is not suggested because the file is managed by the kubelet and can be overwritten on during Pod creation/restart.

Default hosts file content

Start an Nginx Pod which is assigned a Pod IP:

kubectl run nginx --image nginx

pod/nginx created

Examine a Pod IP:

kubectl get pods --output=wide

NAME     READY     STATUS    RESTARTS   AGE    IP           NODE
nginx    1/1       Running   0          13s    10.200.0.4   worker0

The hosts file content would look like this:

kubectl exec nginx -- cat /etc/hosts

# Kubernetes-managed hosts file.
127.0.0.1	localhost
::1	localhost ip6-localhost ip6-loopback
fe00::0	ip6-localnet
fe00::0	ip6-mcastprefix
fe00::1	ip6-allnodes
fe00::2	ip6-allrouters
10.200.0.4	nginx

By default, the hosts file only includes IPv4 and IPv6 boilerplates like localhost and its own hostname.

Adding additional entries with hostAliases

In addition to the default boilerplate, you can add additional entries to the hosts file. For example: to resolve foo.local, bar.local to 127.0.0.1 and foo.remote, bar.remote to 10.1.2.3, you can configure HostAliases for a Pod under .spec.hostAliases:

service/networking/hostaliases-pod.yaml 
apiVersion: v1
kind: Pod
metadata:
  name: hostaliases-pod
spec:
  restartPolicy: Never
  hostAliases:
  - ip: "127.0.0.1"
    hostnames:
    - "foo.local"
    - "bar.local"
  - ip: "10.1.2.3"
    hostnames:
    - "foo.remote"
    - "bar.remote"
  containers:
  - name: cat-hosts
    image: busybox:1.28
    command:
    - cat
    args:
    - "/etc/hosts"

You can start a Pod with that configuration by running:

kubectl apply -f https://k8s.io/examples/service/networking/hostaliases-pod.yaml

pod/hostaliases-pod created

Examine a Pod's details to see its IPv4 address and its status:

kubectl get pod --output=wide

NAME                           READY     STATUS      RESTARTS   AGE       IP              NODE
hostaliases-pod                0/1       Completed   0          6s        10.200.0.5      worker0

The hosts file content looks like this:

kubectl logs hostaliases-pod

# Kubernetes-managed hosts file.
127.0.0.1	localhost
::1	localhost ip6-localhost ip6-loopback
fe00::0	ip6-localnet
fe00::0	ip6-mcastprefix
fe00::1	ip6-allnodes
fe00::2	ip6-allrouters
10.200.0.5	hostaliases-pod

# Entries added by HostAliases.
127.0.0.1	foo.local	bar.local
10.1.2.3	foo.remote	bar.remote

with the additional entries specified at the bottom.

Why does the kubelet manage the hosts file?

The kubelet manages the hosts file for each container of the Pod to prevent the container runtime from modifying the file after the containers have already been started. Historically, Kubernetes always used Docker Engine as its container runtime, and Docker Engine would then modify the /etc/hosts file after each container had started.

Current Kubernetes can use a variety of container runtimes; even so, the kubelet manages the hosts file within each container so that the outcome is as intended regardless of which container runtime you use.

2 - Extend Service IP Ranges

FEATURE STATE: Kubernetes v1.27 [alpha]

This document shares how to extend the existing Service IP range assigned to a cluster.

Before you begin

You need to have a Kubernetes cluster, and the kubectl command-line tool must be configured to communicate with your cluster. It is recommended to run this tutorial on a cluster with at least two nodes that are not acting as control plane hosts. If you do not already have a cluster, you can create one by using minikube or you can use one of these Kubernetes playgrounds:

Your Kubernetes server must be at or later than version v1.29. To check the version, enter kubectl version.

API

Kubernetes clusters with kube-apiservers that have enabled the MultiCIDRServiceAllocator feature gate and the networking.k8s.io/v1alpha1 API, will create a new ServiceCIDR object that takes the well-known name kubernetes, and that uses an IP address range based on the value of the --service-cluster-ip-range command line argument to kube-apiserver.

kubectl get servicecidr

NAME         CIDRS          AGE
kubernetes   10.96.0.0/28   17d

The well-known kubernetes Service, that exposes the kube-apiserver endpoint to the Pods, calculates the first IP address from the default ServiceCIDR range and uses that IP address as its cluster IP address.

kubectl get service kubernetes

NAME         TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)   AGE
kubernetes   ClusterIP   10.96.0.1    <none>        443/TCP   17d

The default Service, in this case, uses the ClusterIP 10.96.0.1, that has the corresponding IPAddress object.

kubectl get ipaddress 10.96.0.1

NAME        PARENTREF
10.96.0.1   services/default/kubernetes

The ServiceCIDRs are protected with finalizers, to avoid leaving Service ClusterIPs orphans; the finalizer is only removed if there is another subnet that contains the existing IPAddresses or there are no IPAddresses belonging to the subnet.

Extend the number of available IPs for Services

There are cases that users will need to increase the number addresses available to Services, previously, increasing the Service range was a disruptive operation that could also cause data loss. With this new feature users only need to add a new ServiceCIDR to increase the number of available addresses.

Adding a new ServiceCIDR

On a cluster with a 10.96.0.0/28 range for Services, there is only 2^(32-28) - 2 = 14 IP addresses available. The kubernetes.default Service is always created; for this example, that leaves you with only 13 possible Services.

for i in $(seq 1 13); do kubectl create service clusterip "test-$i" --tcp 80 -o json | jq -r .spec.clusterIP; done

10.96.0.11
10.96.0.5
10.96.0.12
10.96.0.13
10.96.0.14
10.96.0.2
10.96.0.3
10.96.0.4
10.96.0.6
10.96.0.7
10.96.0.8
10.96.0.9
error: failed to create ClusterIP service: Internal error occurred: failed to allocate a serviceIP: range is full

You can increase the number of IP addresses available for Services, by creating a new ServiceCIDR that extends or adds new IP address ranges.

cat <EOF | kubectl apply -f -
apiVersion: networking.k8s.io/v1alpha1
kind: ServiceCIDR
metadata:
  name: newcidr1
spec:
  cidrs:
  - 10.96.0.0/24
EOF

servicecidr.networking.k8s.io/newcidr1 created

and this will allow you to create new Services with ClusterIPs that will be picked from this new range.

for i in $(seq 13 16); do kubectl create service clusterip "test-$i" --tcp 80 -o json | jq -r .spec.clusterIP; done

10.96.0.48
10.96.0.200
10.96.0.121
10.96.0.144

Deleting a ServiceCIDR

You cannot delete a ServiceCIDR if there are IPAddresses that depend on the ServiceCIDR.

kubectl delete servicecidr newcidr1

servicecidr.networking.k8s.io "newcidr1" deleted

Kubernetes uses a finalizer on the ServiceCIDR to track this dependent relationship.

kubectl get servicecidr newcidr1 -o yaml

apiVersion: networking.k8s.io/v1alpha1
kind: ServiceCIDR
metadata:
  creationTimestamp: "2023-10-12T15:11:07Z"
  deletionGracePeriodSeconds: 0
  deletionTimestamp: "2023-10-12T15:12:45Z"
  finalizers:
  - networking.k8s.io/service-cidr-finalizer
  name: newcidr1
  resourceVersion: "1133"
  uid: 5ffd8afe-c78f-4e60-ae76-cec448a8af40
spec:
  cidrs:
  - 10.96.0.0/24
status:
  conditions:
  - lastTransitionTime: "2023-10-12T15:12:45Z"
    message: There are still IPAddresses referencing the ServiceCIDR, please remove
      them or create a new ServiceCIDR
    reason: OrphanIPAddress
    status: "False"
    type: Ready

By removing the Services containing the IP addresses that are blocking the deletion of the ServiceCIDR

for i in $(seq 13 16); do kubectl delete service "test-$i" ; done

service "test-13" deleted
service "test-14" deleted
service "test-15" deleted
service "test-16" deleted

the control plane notices the removal. The control plane then removes its finalizer, so that the ServiceCIDR that was pending deletion will actually be removed.

kubectl get servicecidr newcidr1

Error from server (NotFound): servicecidrs.networking.k8s.io "newcidr1" not found

3 - Validate IPv4/IPv6 dual-stack

This document shares how to validate IPv4/IPv6 dual-stack enabled Kubernetes clusters.

Before you begin

  • Provider support for dual-stack networking (Cloud provider or otherwise must be able to provide Kubernetes nodes with routable IPv4/IPv6 network interfaces)
  • A network plugin that supports dual-stack networking.
  • Dual-stack enabled cluster
Your Kubernetes server must be at or later than version v1.23. To check the version, enter kubectl version.

Validate addressing

Validate node addressing

Each dual-stack Node should have a single IPv4 block and a single IPv6 block allocated. Validate that IPv4/IPv6 Pod address ranges are configured by running the following command. Replace the sample node name with a valid dual-stack Node from your cluster. In this example, the Node's name is k8s-linuxpool1-34450317-0:

kubectl get nodes k8s-linuxpool1-34450317-0 -o go-template --template='{{range .spec.podCIDRs}}{{printf "%s\n" .}}{{end}}'

10.244.1.0/24
2001:db8::/64

There should be one IPv4 block and one IPv6 block allocated.

Validate that the node has an IPv4 and IPv6 interface detected. Replace node name with a valid node from the cluster. In this example the node name is k8s-linuxpool1-34450317-0:

kubectl get nodes k8s-linuxpool1-34450317-0 -o go-template --template='{{range .status.addresses}}{{printf "%s: %s\n" .type .address}}{{end}}'

Hostname: k8s-linuxpool1-34450317-0
InternalIP: 10.0.0.5
InternalIP: 2001:db8:10::5

Validate Pod addressing

Validate that a Pod has an IPv4 and IPv6 address assigned. Replace the Pod name with a valid Pod in your cluster. In this example the Pod name is pod01:

kubectl get pods pod01 -o go-template --template='{{range .status.podIPs}}{{printf "%s\n" .ip}}{{end}}'

10.244.1.4
2001:db8::4

You can also validate Pod IPs using the Downward API via the status.podIPs fieldPath. The following snippet demonstrates how you can expose the Pod IPs via an environment variable called MY_POD_IPS within a container.

        env:
        - name: MY_POD_IPS
          valueFrom:
            fieldRef:
              fieldPath: status.podIPs

The following command prints the value of the MY_POD_IPS environment variable from within a container. The value is a comma separated list that corresponds to the Pod's IPv4 and IPv6 addresses.

kubectl exec -it pod01 -- set | grep MY_POD_IPS

MY_POD_IPS=10.244.1.4,2001:db8::4

The Pod's IP addresses will also be written to /etc/hosts within a container. The following command executes a cat on /etc/hosts on a dual stack Pod. From the output you can verify both the IPv4 and IPv6 IP address for the Pod.

kubectl exec -it pod01 -- cat /etc/hosts

# Kubernetes-managed hosts file.
127.0.0.1    localhost
::1    localhost ip6-localhost ip6-loopback
fe00::0    ip6-localnet
fe00::0    ip6-mcastprefix
fe00::1    ip6-allnodes
fe00::2    ip6-allrouters
10.244.1.4    pod01
2001:db8::4    pod01

Validate Services

Create the following Service that does not explicitly define .spec.ipFamilyPolicy. Kubernetes will assign a cluster IP for the Service from the first configured service-cluster-ip-range and set the .spec.ipFamilyPolicy to SingleStack.

service/networking/dual-stack-default-svc.yaml 
apiVersion: v1
kind: Service
metadata:
  name: my-service
  labels:
    app.kubernetes.io/name: MyApp
spec:
  selector:
    app.kubernetes.io/name: MyApp
  ports:
    - protocol: TCP
      port: 80

Use kubectl to view the YAML for the Service.

kubectl get svc my-service -o yaml

The Service has .spec.ipFamilyPolicy set to SingleStack and .spec.clusterIP set to an IPv4 address from the first configured range set via --service-cluster-ip-range flag on kube-controller-manager.

apiVersion: v1
kind: Service
metadata:
  name: my-service
  namespace: default
spec:
  clusterIP: 10.0.217.164
  clusterIPs:
  - 10.0.217.164
  ipFamilies:
  - IPv4
  ipFamilyPolicy: SingleStack
  ports:
  - port: 80
    protocol: TCP
    targetPort: 9376
  selector:
    app.kubernetes.io/name: MyApp
  sessionAffinity: None
  type: ClusterIP
status:
  loadBalancer: {}

Create the following Service that explicitly defines IPv6 as the first array element in .spec.ipFamilies. Kubernetes will assign a cluster IP for the Service from the IPv6 range configured service-cluster-ip-range and set the .spec.ipFamilyPolicy to SingleStack.

service/networking/dual-stack-ipfamilies-ipv6.yaml 
apiVersion: v1
kind: Service
metadata:
  name: my-service
  labels:
    app.kubernetes.io/name: MyApp
spec:
  ipFamilies:
  - IPv6
  selector:
    app.kubernetes.io/name: MyApp
  ports:
    - protocol: TCP
      port: 80

Use kubectl to view the YAML for the Service.

kubectl get svc my-service -o yaml

The Service has .spec.ipFamilyPolicy set to SingleStack and .spec.clusterIP set to an IPv6 address from the IPv6 range set via --service-cluster-ip-range flag on kube-controller-manager.

apiVersion: v1
kind: Service
metadata:
  labels:
    app.kubernetes.io/name: MyApp
  name: my-service
spec:
  clusterIP: 2001:db8:fd00::5118
  clusterIPs:
  - 2001:db8:fd00::5118
  ipFamilies:
  - IPv6
  ipFamilyPolicy: SingleStack
  ports:
  - port: 80
    protocol: TCP
    targetPort: 80
  selector:
    app.kubernetes.io/name: MyApp
  sessionAffinity: None
  type: ClusterIP
status:
  loadBalancer: {}

Create the following Service that explicitly defines PreferDualStack in .spec.ipFamilyPolicy. Kubernetes will assign both IPv4 and IPv6 addresses (as this cluster has dual-stack enabled) and select the .spec.ClusterIP from the list of .spec.ClusterIPs based on the address family of the first element in the .spec.ipFamilies array.

service/networking/dual-stack-preferred-svc.yaml 
apiVersion: v1
kind: Service
metadata:
  name: my-service
  labels:
    app.kubernetes.io/name: MyApp
spec:
  ipFamilyPolicy: PreferDualStack
  selector:
    app.kubernetes.io/name: MyApp
  ports:
    - protocol: TCP
      port: 80

Validate that the Service gets cluster IPs from the IPv4 and IPv6 address blocks using kubectl describe. You may then validate access to the service via the IPs and ports.

kubectl describe svc -l app.kubernetes.io/name=MyApp

Name:              my-service
Namespace:         default
Labels:            app.kubernetes.io/name=MyApp
Annotations:       <none>
Selector:          app.kubernetes.io/name=MyApp
Type:              ClusterIP
IP Family Policy:  PreferDualStack
IP Families:       IPv4,IPv6
IP:                10.0.216.242
IPs:               10.0.216.242,2001:db8:fd00::af55
Port:              <unset>  80/TCP
TargetPort:        9376/TCP
Endpoints:         <none>
Session Affinity:  None
Events:            <none>

Create a dual-stack load balanced Service

If the cloud provider supports the provisioning of IPv6 enabled external load balancers, create the following Service with PreferDualStack in .spec.ipFamilyPolicy, IPv6 as the first element of the .spec.ipFamilies array and the type field set to LoadBalancer.

service/networking/dual-stack-prefer-ipv6-lb-svc.yaml 
apiVersion: v1
kind: Service
metadata:
  name: my-service
  labels:
    app.kubernetes.io/name: MyApp
spec:
  ipFamilyPolicy: PreferDualStack
  ipFamilies:
  - IPv6
  type: LoadBalancer
  selector:
    app.kubernetes.io/name: MyApp
  ports:
    - protocol: TCP
      port: 80

Check the Service:

kubectl get svc -l app.kubernetes.io/name=MyApp

Validate that the Service receives a CLUSTER-IP address from the IPv6 address block along with an EXTERNAL-IP. You may then validate access to the service via the IP and port.

NAME         TYPE           CLUSTER-IP            EXTERNAL-IP        PORT(S)        AGE
my-service   LoadBalancer   2001:db8:fd00::7ebc   2603:1030:805::5   80:30790/TCP   35s